Advanced Phone Configuration
This section contains information about configuring more difficult or advanced settings on the phones.
- Access The Web Interface of a Polycom Phone
- Add VLAN Tag to Aastra/Mitel 6800 Colour Display Phone
- Add VLAN Tag to Aastra/Mitel Monochromatic Phone
- Enable ZTP on a Polycom
- Enter Provisioning Server in Web GUI for Yealink
- Factory Reset a Cisco VoIP Phone
- Factory Reset a Polycom Phone
- Factory Reset Linksys PAP ATA
- Manually Set Up a Static IP Address on a Polycom Phone
- Set Config Server on Grandstream GXP2160
- Set up a Static IP Address on a Linksys or Cisco Phone
- Set Up DNS on a Polycom Phone
- Set up Profile Rule on a Linksys or Cisco Phone
- Set Up Provisioning Server Address on a Polycom Phone
- Set Up the Profile Rule on a Linksys Analogue Telephone Adapter (ATA)
- Setup Static IP Address on Aastra/Mitel Monochromatic Phone
- Setup Static IP on Aastra/Mitel 6800 Colour Display Phone
- Update Server Path on Grandstream
- Upgrade Firmware on Aastra or Mitel